DNP3 and SNMP Support

Home / DNP3 and SNMP Support

DNP3 and SNMP Support

MiMOMax Wireless radios can be accessed via DNP3 and SNMP – widely used protocols for communications and network monitoring.

DNP3

A highly robust interoperable communications protocol, DNP3 (Distributed Network Protocol version 3.0) can be used by MiMOMax radios for network monitoring purposes. Used to communicate between RTUs (Remote Terminal Units), IEDs (Intelligent Electronic Devices) and SCADA master stations (aka Control Centres), various DNP3 points can be easily added or removed using MiMOMax Configuration, Control & Monitoring Software depending on the user’s monitoring needs.

SNMP

MiMOMax radios can be accessed via SNMPv2c/3 (Simple Network Management Protocol) for network monitoring purposes. The radio supports a variety of traps (notifications) in combination with data acquired via polling. SNMP has options for plain connection or secure authentication with DES or AES128.

Related Products

utilities point to multipoint narrowband scada radio

Ubiik Mimomax Tornado Radio

Our award-winning MIMO Tornado radio is pushing the boundaries of what can be achieved in narrowband channels for SCADA and voice linking.

Operates in licensed frequency bands between 136-174MHz, 400-470MHz, 757-788MHz, 806-960MHz

Built-in duplexers and band-pass filters to minimize interference

View Product

utilities point to multipoint redundancy 1+1 narrowband scada radio

Ubiik Mimomax Tornado 1+1

Providing automated support for both a warm and hot standby system, with the Ubiik Mimomax Tornado 1+1, if one radio fails a second standby radio is automatically switched in to take over.

Offers multiple configurations with the ability to switch over Serial, GPIO, alarm and antenna ports

Flexibility of an optional two-antenna solution - each radio has its own antenna providing a redundant antenna solution

View Product

utilities point to multipoint narrowband remote scada radio Pyxis

Ubiik Mimomax Pyxis

Sharing common features and interfaces with our high spec Tornado radio, Pyxis has been designed to operate either as a stand-alone radio or to be deployed alongside Tornado as a Tier II endpoint in a multi-tier network.

Network auto-discovery and LED diagnostics for fast and simple deployment

Data acceleration via sophisticated data compression techniques to increase bandwidth

View Product

Series II NDL

A highly reliable and robust point-to-point wireless linking solution, the Ubiik Mimomax Network Digital Link (NDL) is based on the Series II radio and is designed to support PMR Linking, SCADA and Backhaul applications.

A number of internal interfaces are available to support various SCADA applications

Multiple links can be cascaded to cope with difficult terrain and very long paths.

View Product

Series II OPV

A highly intelligent point-to-point radio system providing complete rural substation Teleprotection, the Ubiik Mimomax Optimized Protection Variant (OPV) is a communications solution for both power line protection and SCADA applications.

Designed to meet CAT I, II and III protection levels - can be employed to link power line protection relays (e.g. General Electric L90) within critical network infrastructure

Maintain secure mission-critical operations with multiple layers of integral security

View Product